MaxxMacro 70 Pneumatic Chuck Internal Repair Kit includes O'rings, springs, bearings.

Precision self-centering vise with dual-screw for perfect alignment. 65mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

MaxxMacro 54 Aluminum Blank Electrode Holder is Maxx Tooling's cross compatible System 3R EDM blank aluminum electrode holder. MaxxMacro 54 Aluminum Blank Electrode Holder is fully assembled with the MaxxMacro 54 Stainless Cast Pallet mounted and ready to machine your own pattern.

MaxxMacro 2391 Double Ruler Vise MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Movable jaws for mounting two rectangular workpieces at the same time. Detachable Z-support tabs ensure simple setting-up.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2391 MXRuler WEDM Ruler Vise features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on ruler MX-239XXX. MaxxMacro 2391 MXRuler WEDM Ruler Vise is fully compatible with System 3R ruler system. Recommended maximum workpiece weight 7 kg. Tightening torque 8 Nm Supplied with two MaxxMacro 23926 MXRuler WEDM Zero-line support tab

MaxxMacro 54 Stainless Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Brass Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground.

MaxxMacro 54 Super Vise Compact comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vise for mounting rectangular workpieces in the MaxxMacro system. Clearance on all sides.

MaxxDesign Exclusive Features:

• High quality materials: Full rust proof design.
• Clearance: on all sides.

Includes 3 pair of jaws and 1 set of screws.

Compatible with Maxx-ER and MaxxMacro UnoSet vises.

MaxxMacro 54 Stainless Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Includes Chip Carrier (Chip Sensor) and threaded holes for Cleat.

Product Information:

The MaxxMacro 54 Stainless Blank Round Stock Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. MaxxMacro 54 Stainless Pocket Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Stainless Full Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• No Chip Carrier (Chip Sensor) nor threaded holes for Cleat

Product Information:

The MaxxMacro 54 Stainless Full Blank Round Stock Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. MaxxMacro 54 Stainless Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMagnum Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

Product Information:

Precision-engineered self-centering vise designed for high-accuracy machining applications. Featuring a robust build and dual screw mechanisms, it ensures perfect workpiece alignment and repeatability. With a clamping range of 120 mm, it’s ideal for 5-axis CNC operations, modular setups, and quick part changes.

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

MaxxDesign Exclusive Features:

• Master for horizontal Macro chucks.
• 100% cross-compatible with OEM system

MaxxMacro 70 Manual QuickChuck Low Profile Repair Kit Rust Proof

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail Rust Proof Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Full rust-proof construction including chuck, internals, and 440C rail.
• 100% cross-compatible with OEM system

Supplied in sets of 2.

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To transition from the MaxxMacro WEDM Mounting Head system to a MaxxMacro 54 Quickchuck, the setup sits just above the zero line on Wire EDM machines.

MaxxDesign Exclusive Features:

• Rust Proof design suited for submerged.
• QuickChuck bar action for fast, manual fixture changes

MaxxMacro 2328 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for mounting rectangular (<60 mm) and round (Ø8-45 mm) workpieces in the WEDM system.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Vise for mounting rectangular (<60 mm) workpieces in the WEDM system.

MaxxMacro 70 Multi 3 Manual Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• High quality materials: Chuck is 440C and rail is 420.
• 100% cross-compatible with OEM system